Long Island Shooters Forum banner

The M14/M1A CASM Scope Mount

2699 Views 0 Replies 1 Participant Last post by  Paté
The M14/M1A CASM Scope Mount A New Generation 4-Point Optics Platform

A "new generation", "4-point" mounting solution for your M14 or M1A rifle that "unitizes" the mount to the M14 receiver to create an exceptionally secure M14 optics platform, was released today by M14.ca. It is the first 4-point M14 scope mount, engineered to eliminate that troublesome "left leg" used by most of the current scope mounts, and all of the on-going problems associated with that mounting approach.

"No more loose side mount screws, no more rotation under recoil around that side screw (which leads to loss of vertical zero) and no more shimming to set the proper tension and windage for horizontal zero on out of specification receivers. Also, no more having to use Epoxy® or welding, and no more worrying about over-torqued side screws shearing off.," says a company representative of M14.ca, the scope mount's manufacturer.

"We use the M14/M1A rear sight pocket as a large, solid and consistently dimensioned mounting surface area for our scope mount. Previous scope mount designs use the M14/M1A receiver side screw hole and the much smaller stripper clip guide dovetail slot, both of which are often out of specification. The 4-point retention system begins at the back of the mount, which is tensioned upwards by an over-sized 5/16″ half dog tipped set screw, which rotates the mount around the two tapered head 1/4″ self centering screws in the rear sight ears. This upwards tension at the rear, forces the front of the mount tight to the front of the receiver. By design, the mount is installed with the front end a few degrees down from true to the bore horizontal. Then, the front of the mount is pre- tensioned up by another 5/16″ half dog tipped set screw, which creates a unitised receiver and mount assembly."

The vertical and the horizontal contact screws are then locked in place with individual locking set screw, and optionally, with the included Blue Loctite®. This approach keeps all four of the oversized contact screws effectively double-locked, to maintain proper adjustment, and ensure absolute "bullet proof" security. Your new generation M14 scope mount won't come loose.

The M14/M1A CASM® scope mount from M14.ca, is solid, sturdy, and secure, and is a great new addition
to an up and coming new line of innovative products for your M14 rifle.

For more information, please visit their web site at www.m14.ca
See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.