Long Island Shooters Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
246 Posts
Discussion Starter · #1 ·
.....anything I'm missing here? I'm having a tough time getting the front post of my new tech 22 sights installed on my Ruger 10/22. It seems to be some poor machining. Anybody have a few tricks they could tell me or have a similar issue?
Thanks in advance.
 

·
Registered
Joined
·
1,572 Posts
Tap it into the front dovetail with a wooden dowel and small hammer. Be sure you ordered the correct one before undertaking this adventure.  
 

·
Premium Member
Joined
·
2,287 Posts
Make sure the set screw through the front of the sight is loose.
 

·
Registered
Joined
·
246 Posts
Discussion Starter · #4 ·
Thank you; I actually got it in by tapping the sight in from left to right. The directions say, right to left. I'm a maintenance guy by trade and don't like to deviate from manufactures directions but for whatever reason it worked.
Thank you again, gun looks great.

...now, whats the best way to push the detent button in and get this puppy sighted?
 
1 - 5 of 5 Posts
Top