Long Island Shooters Forum banner
stuck
1-20 of 21 Results
  1. Open Firearm Discussions
    while I was cleaning a muzzle loader, the wire brush broke free and is now stuck in the barrel. The rifle is a side lock, so i cant just push it out from the other end. Any ideas?
  2. AR - [Rifles]
    While dry firing a NY compliant rifle, the trigger seems to be getting stuck on the reset after keeping it depressed and running the bolt. Process is dry fire, hold down trigger, run the bolt, let off trigger until it resets and then pull trigger again. there also seems to be a longer reset...
  3. Semi-Auto [Handguns]
    The members on this forum have helped me resolve a couple of firearms issues already, so I thought I would contribute with some "how to" advice. I recently purchased a 1974 Colt 1911 that had been a safe queen for over a decade. The gun is in excellent shape and functions well, but when I tried...
  4. Out of State Crimes
    Is it bad that i think this is kind of funny? At least I feel sorry for the damage to the homeowner's house. Burglar stuck in chimney dies after homeowner lights fire http://www.foxnews.c.../?intcmp=hplnws A burglar stuck in a chimney died Saturday after the homeowner lit a fire in the...
  5. Revolvers [Handguns]
    my revolver is jammed, some of you tired to help me out at LIF Brookhaven last week. The cylinder turns fine but I can't open it to load. Once before this happened and a RO at the range got it open for me by turning the end of the bolt. I tried this by turning clockwise [with barrel facing...
  6. Reloading
    Novice reloader here in need of assistance. I was decapping my .223 brass and got one stuck in the die. The case got pulled rout of the shell holder mangling the rim of the case. Is this common and how do I get it out? The question is this: do you tumble the brass first and then start...
  7. Chit-Chat
    Stuck in NY don't fret.... use EVERYDAY to stick it to the man , just don't throw your fellow NY'er under the bus - be open minded and think for your self . Keep thinking ....... ,
  8. Reloading
    I'm loading 45ACP with a Hornady LNL with Hornady's seating die. I'm using 200gr LSWC bullets. It goes up into the die fine but when coming down, it's getting stuck. It does come out eventually and the reload looks fine and it even chambers fine. Does anyone know what's causing this? Too...
  9. Pump [Shotguns]
    Hello, hoping some one can shine some light on my new 870 issue. Basically if the gun is pointing up, the action gets locked in open position. This is regardless if I'm cycling it with or without ammo. I can hear a click when I point the gun up and the action just wont release. No matter how...
  10. Chit-Chat
    Nice to be free in SD
  11. AR - [Rifles]
    My buddy just did a barrel swap on his ar and on the very first shot the casing got stuck in the barrel. It's brass prvi 5.56 ammo and he hasn't had a problem before changing the barrel. He kept the old BCG just swapped the barrel. He was able to get the casing out when he got home and hasn't...
  12. Semi-Auto [Shotguns]
    Hey all, Just got this about a month ago and went to the range. I fired 8 rounds through it and it was all fine. Then round 2, loaded the Mossy and I couldn't flip the safety switch back to ON. Its stuck and I can't push it forward. Tried everything but no avail. Can I take off that switch...
  13. Shotgun
    I am trying to remove the barrell from my remingtonm 1100 Classic Trap 12 gauge for a detailed cleaning but the barrel is stuck and wont budge. * I have the magazine cap removed, * The fore-end is off. * The breach bolt is locked to the rear or open. Any tips would be appreciated. Thanks
  14. Chit-Chat
    Waverly Ave bridge. Stuck for an hour so far since hitting 112. Sent from my SCH-I545 using Tapatalk 4
  15. Milsurp [Rifles]
    putting a brasstacker mount on one of my mosins but one of pins on rear sight won't budge using just a punch. I guess it's soldered even though it shouldn't have been. Any suggestions short of using a torch? lubricants etc...
  16. Pump [Shotguns]
    When trying to cycle rounds, the follower gets stuck in the magazine tube. I had to manually pull the shells out through the ejection port. When I unscrewed the magazine cap, the spring popped out (I was expecting it to be under pressure) but it squirmed out in a tangled mess. My guess is...
  17. Pump [Shotguns]
    I have a 20 gauge 870. Sometimes when I rack the pump its been getting lodged in the full rearward position. Possibly overriding a stop? Any ideas? Or am I visiting bob at country?
  18. AK - [Rifles]
    I went to the range yesterday, sunday. Sighted in my aimpoint on my saiga. Once it was sighted in a friend wanted to shoot it, so i loaded a box of tula fmj in a mag and let him have at it. 15 rounds into the mag he called me over. He said it did something funny, I took the gun and racked the...
  19. Hurricane Sandy Discussions
    Will vehicles run out of gas?Do you think you will see vehicles all over the road out of gas this coming weekend?YES2362.16%NO1437.84%
1-20 of 21 Results
Top