Search Results for ‘slide’

Sig P320 AXG- titanium coated from Sig. Under 50 rounds through. Two sets of G10 grip panels - $350 + shipping Sig P320 Full size 4.7”black nitride slide with internals - $200 + shipping with Sig Barrel and spring $300. All less than 50 rounds through Sig P320 Carry - stainless slide with...

http://www.strikeind...ml#.Vz2pT5D2Zr9

Hi, I own a S&W SW99 (P99 clone). Looking to have slide work done to have a more aggressive stippling to get a better grip on the slide. Who will do the on the island and how much does the work go for? If no one on the island could do it, who do you recommend? Someone that won't hurt my wallet...

Brace yourselves. This thread is about guns. As a new handgun owner, I'm trying to adopt good practices and habits and really learn the ins and outs properly. I've noticed that a lot of people think hitting the slide stop/release to chamber a new round is somehow bad for the gun, while it's...

New Dan Wesson "Bruin" 10mm Long Slide 1911 by CZ With SHOTShow just around the corner, the "sneak peaks" are starting to make their appearance. Once of the first is the upcoming long-slide 1911 by CZ under the Dan Wesson brand. The new handgun is a single stack chambered in both 10mm and .45...

Picked up a .22 cal slide on Black Friday for my Sig Sauer 1911. Having issues with the slide locking back and not feeding next round. At first I thought I was riding the slide lock lever but that is not the case. Shot lefty and had my son watch and never hit it. Some 10 round mags run fine and...

Anyone using a 22 conversion slide on their 1911's? Specifically Sig Sauer 1911

I'm having a bunch of fun shooting my SW990L. But I'd like my wife to get interested in it. With the small grips, it's just her size. But....the slide is really stiff. Not sure she can manage it as easily as she can some of my other pistols. Is there any way to reduce the amount of strength it...

any place in Suffolk can help. Shooting my brand new 1911. 7 the round in the slide SIEZED to the rear it won't budge. Dan Wesson valor. Wtf

So if you're poor and commit a crime you get out of jail with no bail. To accomplish this the city is going to spend 17.8 million, makes perfect sense to me. Arrestees accused of low-level crimes in New York City won't need to pay bail under a $17.8 million program announced Wednesday to divert...

Custom Slide Modifications for Glock OEM Slides from Lone Wolf Dist. By Matt on June 17, 2015 in Guns My north Idaho neighbors, Lone Wolf Distributors (LWD), have been offering custom slide modifications on their own house brand slides for quite a while. Now they are expanding that service to...

can harm be done to the average SA pistol (1911, CZ-75, etc.) if one keeps a mag loaded but no round chambered and the slide racked back and locked. In other words if one wants to keep a SA pistol ready to go except for chambering a round, would the spring eventually be weakened by keeping...

"With the right technique, just about anyone can rack a slide on a handgun, chambered for just about any round. That doesn't mean that some people can't benefit from a little help. Whether it's for strength issues, health issues or just more speed, the TacRack, from Mounting Solutions Plus...

Hi guy's wanted to know if anyone knows any place on the Island where I can have my glock slide refinished. I checked online and there a lot of places, but have to mail it in. I called 1 police plaza and they said I can't sent the slide on my own and have to take it to a gun store and have...

I picked up my brand new Beretta PX4 in .40 today and the slide seems very tight. I am new to handguns so I was wondering if this is normal? Not sure if it is just a matter of breaking it in or if this is specific to the PX4. Any advice would be appreciated.

I saw these in a FL gun show and liked the look of it.

Rogers Optic-Ready Glock Slide and the RMR: Ready for Duty November 19, 2014 Mark Miller No Comments Guns The Rogers Glock Slide with a Trijicon RMR (Ruggedized Miniature Reflex) is a great candidate for a duty gun. Used with the Safariland ALS P-2 Optic Sight Holster, it has the...

So I'm building a Glock long slide race gun, not because I need one, just because I like to tinker. So far had the slide cut with machined windows, I finished jeweling the barrel a week ago, wanted the slide cut so the jeweling shows through the cuts, undecided how I'm going to finish the slide...

http://www.handgunsmag.com/galleries/9-great-long-slide-9mm-pistols/ Enjoy

Who's going? Bring a change of shorts with you...