Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Chit-Chat
    I was taking apart my 686 for a cleaning after a trip to the range and after removing the yoke/cylinder found a spring laying on the table. It had a small pointed metal protrusion which I couldn't identify. I went into an exploded diagram and couldn't find the part. Upon visiting a You Tube...
  2. Semi-Auto [Rifles]
    I need to remove the scope rail from my 10/22. One screw head is stripped. Screwed into the receiver with threadlocker blue. I thought about buying a grabit micro extractor and try to remove it myself. What gunsmith would you bring the receiver to about what would it cost?
  3. Chit-Chat
    PRETTY BACK ON CUOMO WITH INVESTIGATION
  4. Semi-Auto [Handguns]
    The members on this forum have helped me resolve a couple of firearms issues already, so I thought I would contribute with some "how to" advice. I recently purchased a 1974 Colt 1911 that had been a safe queen for over a decade. The gun is in excellent shape and functions well, but when I tried...
  5. Out Of State Licensing
    Thankfully I have paperwork on the way for our VA CCW licenses being we spend so much time there. They are dropping reciprocity with 25 states...
  6. Chit-Chat
    "Screw you." That's it. Except the first word isn't "Screw." It's not exactly a traditional argument, but it's certainly appropriate here. The fact is that there is no point in arguing with liberal gun-control advocates because their argument is never in good faith. They slander gun owners as...
  7. Semi-Auto [Rifles]
    Anyone here successfully remove a damaged/ stuck LR308 Bolt Catch screw ? I ordered a Phase 5 Ambi Bolt Release and I cannot, with the tools readily available to me, remove the screw. The head is stripped and it is a difficult spot to work in. I tried a number of work arounds but it is not...
  8. AK - [Rifles]
    I had a Midwest Industries quad rail on my Saiga 7.62 with a Kalishnakov sniper stock which rendered it an assault weapon. So inspired by Destro's build I ordered replacement furniture from Saigastock.com. I am changing it out to a Zombie Hunter edition. I got the stock mounted and when I...
  9. Revolvers [Handguns]
    I was taking off the B-Square scope mount to reinstall the rear sight and realize I lost the front screw. Does anyone know what size it is? THX.
  10. Bolt Action [Rifles]
    I'm not really sure if this question belongs in this area. I have a sheared off 6/48 screw on my front ring mount of a Remington 700. I do not have any easy-outs that small and would like to have a smith do it for me. Any smith recommendations would be gratefully appreciated. I'm in eastern...
  11. DIY Projects and Builds
    My Swiss K-31 has a scope mount installed. I broke the main screw on the mount last two weeks. I was able to get a replacement screw from Accumounts, however I couldn't get the broken part out. It may be a simple process but I don't have proper tools. Does anyone know there's any shop on the...
  12. Veterans and Military
    Another retailer I will no longer patronize. Army Vet denied employment because She saw action in Afghanistan. http://conservativeb...ed-afghanistan/
  13. Semi-Auto [Rifles]
    Ok first off I bought a cheap mount to go on my m1a, I know I am going to hear it, you should have bought a SA 4th gen, Ya ya I know. I have it all nice except for the front thumb screw is 10-32 and the Springfield m1a is 12-32 thumb screw, so I am like no problem I will just get one from the...
  14. Chit-Chat
    I'm banning coca cola. America the beautiful is only sung in English. Jack and pepsis from here on out.
  15. Law Enforcement
    There is a thread in the regular forum about the new budgets safe act provisions . It does not mention retired guys .... Wtf?
  16. Open Firearm Discussions
    After reading many articles it has been made very clear, especially by the NRA that they would not entertain any ideas concerning gun legislation. My question is, did the NRA's stubbornness end up hurting them instead of helping? The NRA's refusal to budge may have actually caused an increase...
  17. Revolvers [Handguns]
    I have located 2 .44mag SBH, both in 7.5in barrel. 1 is the 3 screw model or old model and the other is the new model. The new model is in stainless, not as clean as the OM, grips need replacing and about $80 more. The OM is Blued, very clean and needs no work. The only thing that worries me is...
  18. Semi-Auto [Handguns]
    The elevation screw in the rear sight of my S&W 41 has a tendency to loosen after a day of shooting causing the sight to "drift". Any suggestions on what to put on the screw that will still allow adjustment, but not allow the screw to loosen? Blue loctite would probably not allow adjustment...
  19. Chit-Chat
    for the handy man, firearms enthusiast http://www.amazon.com/gp/product/B008X448KS/ref=as_li_ss_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B008X448KS&linkCode=as2&tag=evnodaof-20
1-20 of 20 Results
Top