Long Island Shooters Forum banner
removing

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Milsurp [Rifles]
    My Mauser doesn't have the spring or pin to remove the front band. I tried pulling it off but it doesn't budge. Any advice on how to remove the stock? Is it possible? How much force should it take to pull it off? I am thinking that the release broke and someone might of glued the front on.
  2. Semi-Auto [Rifles]
    I opened up the gun to install a new Kidd extractor but I now I've got some trouble. The bolt buffer is out. I'm holding the bolt fully to the rear, but as you can see in my photo, a sliver of the bolt on the left side of the photo (right side of the bolt) is still underneath the slide...
  3. AR - [Rifles]
    Can anyone help me remove a muzzle device from a barrel? I have tried just about everything and I can't get it to budge. I'm 99.9% sure it isn't pinned (it's a brand new PSA upper and it didn't say anything about "compliant" and there doesn't appear to be any marring any where on it). If I...
  4. Bolt Action [Rifles]
    More specifically, staked screws that should not have been staked. This is a Savage 65m (I think, it's a Sears branded Savage) 22Mag bolt action. The bolt is only removed after disassembling half the gun. There is a "plug" in the end of the receiver, behind the bolt. It's held in with a screw...
  5. Open Firearm Discussions
    I was going to use a product from Home Depot to clean the rust off an old project. It was $25 a gallon, so I opted for a 2 liters of pepsi for $1.25. Pretty decent results after a couple of days. It could probably use 2 more days of soaking. Anyone else ever use this cheap sourse of phosphoric...
  6. Other [Rifles]
    got an XS ghost site for my Winchester 94 for fathers day. the rear sight is easy 2 screws but front sight removal they say to tap it with a brass punch left to right (the front sight is dovetailed) my question.... why a brass punch and how hard to tap it ? I don't want to damage the barrel or...
  7. Fishing - Open Discussions
    The Line-Pull Method: How to Get Unhooked and Keep Fishing Article by Joe Cermele Getting hooked is a rite of passage for anglers. It's going to happen eventually, and I'm not talking about a jab. I mean in past the barb. Now, anytime you get stuck with a heavy-gauge hook, or the hook is...
  8. NY Specific Discussions
    Suffolk County tried this 22 years ago and it was denied. Applause erupted Monday night after St. Lawrence County legislators voted 14-1 for a new local law that loosens rules regarding who is eligible to obtain an unrestricted carry-and-conceal pistol license. Roughly 300 people crowded into...
  9. Reloading
    Have 1k plus of lake city 5.56 brass that I'm finally going to process and was wondering how does what as far as removing crimps? I have a Lyman reamer that I've used for small batches but I'm wondering if it's worth springing for a swager. I'm thinking lube, resize/deprime, trim and remove...
  10. Rifles
    Decided to go back to regular oil/solvent but have read before doing so I need to completely remove the frog lube that's on the parts. Can I use regular hopes to remove it? Or do I need something different? Also not part of the OP but can I put a little aeroshell 33 grease on the trigger/hammer...
  11. Semi-Auto [Handguns]
    I have been looking for a way to remove the firing pin from my Sig P-226 without running the risk of damaging the slide. Everything I am seeing is telling me I have to use a punch to hammer out the pin that holds the firing pin in place. The way I see it, one slip and i just damaged my slide...
  12. Reloading
    I have some 40SW loaded ammo I need to de-bulge, and am considering the Lee Bulge Buster. Has anyone run loaded ammo through a bulge remover? What's your experience been? Thanks!
  13. Milsurp [Rifles]
    I am trying to remove the rear sight from my Mosin, but 2 of the 3 pins won't even budge. I assume the sight and the pins have been soldered. Can I use the regular blue can Bernzomatic torch to heat it up?
  14. Chit-Chat
    Whats the point of having a good job anymore? Welfare pays more than minimum wage, there's a massive rise in part time jobs to avoid giving employees insurance. What's the end story? Republican lawmakers are raising new concerns about ObamaCare after several large employers announced they are...
  15. Semi-Auto [Rifles]
    I have a new Ruger 10/22 and I want to remove the standard dovetail sights. I will be installing Tech 200 peep sights and an M1A Carbine replica stock to give the rifle a cool look. Does anyone have any experience with removing and installing new dovetail sights? I tried to tap them out last...
1-15 of 15 Results
Top