Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Reloading
    For those interested I made an adapter to fit my RCBS Primer pocket swager 2 onto my Lee classic turret press. It consist of 2 machine bushings ( fancy washers ) and one washer. The machine bushings were cut to fit around the primer arm base. The machine bushings have an I.d. of 1 - 1/8 and...
  2. Reloading
    So looking into a bullet feeder die and thought I was sold on the hornady .45acp but am now thinking the rcbs may be a better buy. Hornady is caliber specific and plated only. Rcbs is adjustable for 9mm .38/357, 40 and .45 (I load 3 out of 4) and can use lead with cleaning. Also comes with...
  3. Reloading
    Well I've been reloading for a little while and my bench is in the garage with a hornady lnl ap & Lee classic turret, but in the winter months I freeze my butt off. So I'm looking for a third press for my basement don't want to break the bank and go blue. Something midrange, most likely toward...
  4. Reloading
    Need to make a quick decision (tonight) on a case cleaner. Does anyone have the RCBS 87088 Case Cleaner-2 or an opinion on it? Amazon price is $68.25...
  5. Revolvers [Handguns]
    And possibly a roll crimp die I could borrow. I am tapped out.
  6. Reloading
    I almost can't believe it. I thought so highly of their products but it failed. It had 200 cases of 10mm brass in it on for about 2 hours. I went down to check on it and it was just buzzing like the motor seized. The room smelled like burning electrical too. RCBS says they have a 2 year...
  7. Reloading
    OK so I mounted my thrower i got for xmas and I am having serious issues. Trying to throw consistent weights is near impossible. Using a bar scale. Zeroed the scale? Check Using appropriate granulated powder? Check Put scale on different surfaces to ensure they are level? Check Make sure you...
  8. Reloading
    I just got this via email. If you are thinking of starting to reload this might be for you...
  9. Reloading
    I am getting old and losing patience so I am looking to speed up the powder dispensing and weighing process. Anyone have any input on the RCBS Chargemaster combo.
1-9 of 9 Results
Top