Search Results for ‘problems’

Some of you know that I often bash Glocks as being inexpensive alternatives to better handguns - but I assure you almost all of that is in jest. As a matter of fact one of my top three trusted, defensive handguns is a Glock. And I know this happens to all gun makes, but this happened today...

Anyone else having trouble w Optonline access? Can't open on phone, iPad or computer

I am having some trouble getting my bolt foward. Any help will be appreciated.

I'm new to handgun ownership so please forgive me if my terminology is off... I took my glock 19 to the range today and I was hit in the face by my brass a few times. I'm new to owning and shooting a handgun so I'm sure it could be from my form but when I researched it I noticed there are...

I am trying to upload an avatar from photobucket but it won't upload. I am using the IMG code.

I got a brand new escort m87 (87o clone) I'v found Unless i really pump it hard it will not lock into the slide release, The hammer will drop but it will cause the bolt to fully lock into battery. it is a little stuff to lose on low brass and birdshot. But hi brass buck shot is really hard to...

I was cleaning my Remington 770, as I was wiping the bolt, I twisted the end. The part behind the handle. Now I can't twist it back and the nub doesn't line up with the guide into the reciver. The bolt will go in then stops at that part. Any advice?

Mods, I am not sure this belongs int he "reloading" list, but if it does not please move it. I just picked up 1,000 rounds of reman 9mm ammo from Freedom Munitions (thanks as usual Volko) and I noticed very quickly upon inspection that several (36 to be exact out of the 1000) have serrations...

Maybe Al Sharpton wasn't hiring? IRS rehired 824 employees with performance/ethics problems including 141 former employees with issues paying their own taxes Hundreds of former Internal Revenue Service employees who had a history of misconduct and poor performance on the job were rehired by...

*sigh* PSA Freedom upper 1/7 twist 16in barrel, paired with PSA lower and PSA LPK. Shot more steel .223 cased ammo (sorry gents, but I can't stop buying it) today and had a lot of Failure to fires. Let's say out of 80 rounds, about 60 fired. Every time I loaded a mag, the fire round would fire...

Switched over to frog lube just went into safe and the frog lube turned to a sticker mess

So I took a bunch of my firearms to calverton to do a nice relaxing birthday shoot. I was running some Tula steel cased 223 through my DPMS upper/ spikes lower build; and through my PSA build. The DPMS / Spikes build cycled the steel fine. About 80 rounds or so, I had 1 fail to eject. I cleared...

Ok so I was cleaning my mosin on the backyard deck. I had the whole gun cleaned and back to being purrrty. As I'm slowly piecing her back together I drop the rear screw . As I go to catch it, I catch a glimpse of it rolling into the cracks of my deck. Bye bye screw, now what do I do? I can't...

What .308 should I buyRuger American Predator or Thompson Center VentureRuger American Predator228.57%TC Venture571.43%

Ok, I'm trying to set up my die to simply just seat without any crimp. So I turn my die body until it touches the belled case and then I back it off about a half turn. I then turn my seating die down with a bullet in the brass. Now here's the odd issue, I turn the seating die all the way down...

Anyone else having cell service issues?

On Thursday I posted something in the funny photo section and since then I've been receiving dozens of ghost notifications per day and it's driving me crazy. I had to turn off the email notification in my settings. Can the Admins or Mods please look into this? Thanks.

Just had my oil burner serviced after it died overnight. Tech showed me the cone around the nozzle was clogged with a thick gummy black residue and some bright green residue. The stuff was a pia to clean off. After asking if I was using any kind of additives, I realized the last couple of...

Was trying to install my stock the other day and get the end plate on. Had a little issue with the rear takedown pin figured I'd give it another shot or if anyone has suggestions. Got in just fine, locked the castle nut down and tested it out. Pin went into the open position but would not for...

I had my glock 19 Gen 4 for about 7 months now. For the first 700 or so rounds the pistol ran like a champ. about a month or two ago I notice on the last few rounds in the magazine (hollow point) bullets would get hung up on the feed ramp. I called Glock and they told me to change the Magazine...