Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 13 Results
  1. Reloading
    Is it necessary to clean the primer pocket of rifle brass before EACH loading or would it be ok to clean the primer pocket before every other load? Thanks in advance. -Dave
  2. Reloading
    What do you guys do with the 45 acp small primer cases. reload or junk them. any special recipes for these. i have been throwing them away
  3. Reloading
    Well I'm giving up on trying to reload this lake city 308 brass. I picked up a countersink bit to remove the military crimp and everything looked good. Loaded up a few rounds and things were going somewhat smooth although I did have a few primers that didn't seat flush. I had 2 cases on the...
  4. Reloading
    I have been reloading for a while on a single stage press,I clean the pocket every time i reload, I'm getting a progressive and that push out the old primer and seat a new one. My question is how often do you clean the pocket when reloading on a progressive. Thanks Tom
  5. Reloading
    Question how will the primer size (large/small) change your load? I was looking up loads on Hogdens site for the powders that I have, My problem with the data is it shows large primers in their data and my cases have small primers now I do understand that there is more "power" in a large...
  6. Reloading
    1911 Primer Tube Filler Posted by Richard Johnson Another NASGW show announcement from Hornady is the Lock-N-Load 1911 Auto Primer Tube Filler. The pistol shaped device is a semi-auto method of loading trays of 100 "]primers into a tube designed for the Lock-N-Load loading press made by...
  7. Reloading
    Have some LC brass that I'm going to reload. I know that the primer pocket has to have the crimp removed. Not 100% sure about that though. Saw some members using a countersink rather then the $80 rcbs tool. I have a rcbs deburing tool and think that will work in the same way. Just spun the...
  8. Product Review / New Products- Open Discussion
    The Truth About Guns offers a brief primer on Kydex: http://www.thetruthaboutguns.com/2014/02/robert-farago/truth-kydex-holsters/#more-298637
  9. Reloading
    So i had some bullets that i had loaded and i rejected for primer not set deep enough,sideways primer etc. i was using the hammer style puller and i had 2 primers go off, is that a normal thing? I mean it wasnt a big deal, i was just wondering how it went off as i was using the bullet puller as...
  10. Reloading
    Just got back from Suffolk Shooting Supply in Yaphank, Picked up a couple boxes of SPP, $40 per thousand. They had both CCI small pistol standard and mag. There was a bunch on the shelf, but if you need them, they got em....
  11. Off Topic Lounge Chit-Chat
  12. Semi-Auto Shotguns
    I took my 9200 out the other day to put a few slugs down range. First shell fired fine. Second shell, click... then no bang. Examined the shell, light primer strike. Tried another, same thing. Repeated 2 more times. All 4 had light strikes. I've taken it apart and examined the bolt...
1-12 of 13 Results