Long Island Shooters Forum banner
press
1-20 of 43 Results
  1. Chit-Chat
    Without a doubt the EU bureaucracy is on the side of the imperial Islamists. The quicker the UK executes the BREXIT the better for them, and better for the west. The USA and UK should form the nuclease of a western alliance in the coming Crusade against the imperial aggression of Islamism...
  2. Reloading
    I am getting ready to start reloading for the first time with a Lee Classic Turret press so please excuse a possibly dumb question. I used a Lee depriming/decapping die to deprime the 5.56 brass prior to tumbling. From what I understand, after resizing the brass, you are supposed to measure...
  3. Reloading
    For those interested I made an adapter to fit my RCBS Primer pocket swager 2 onto my Lee classic turret press. It consist of 2 machine bushings ( fancy washers ) and one washer. The machine bushings were cut to fit around the primer arm base. The machine bushings have an I.d. of 1 - 1/8 and...
  4. Reloading
    I have a Lee Turret, and I love it, I was thinking about upgrading to a Dillon, but here is my dilemma. I do not reload pistol rounds, well I load .44 magnum for my rifle, but I do not shoot that enough. I reload for, .223/5.56, .50 Beowulf, .444 Marlin, .45-70, .30-06, .300 Winchester Magnum...
  5. Out of State Crimes
    The media is turning a botched bank robbery attempt into a "Mass shooting targeting Planned Parenthood" where no one in the Planned Parenthood building - staff or clients - were injured. The crazed shooter was alone in the building with all those unarmed individuals and made no attempt to harm...
  6. Chit-Chat
    http://www.usherald....-the-word-pork/
  7. Reloading
    I'm looking at buying a single stage press to load 223 and 308 and I'm not married to a brand. I'm sort of in between RCBS and Hornady. Are the dies interchangeable between manufacturers? Any reason to consider a different manufacturer?
  8. Open Shout Out!
    Enjoy. Sadly, not too far from the truth.
  9. Reloading
    Just throwing this out there. I have an old, and I mean old from the 50's old Herters single stage press buried in my pile o crud. It's massive. Dies for big boomers which I don't foresee ever reloading again, .264 WinMag .338 WinMag, .458 WinMag. You reloaders - is this worth digging out and...
  10. Reloading
    Well started out nice enough , wanted to bang out a quick hundred of 9mm on the Lnl . Then every little stupid problem arose from stuck primers, to loose powder hopper, resizing dies not resizeing, well I decided to call it a night before I started pouring gasoline in it. And I'm sure their...
  11. NYC and NY State Crimes
    STATEMENT OF CHUCK CANTERBURY, NATIONAL PRESIDENT, FRATERNAL ORDER OF POLICE
  12. NYC and NY State Crimes
    Awaiting NYPD Press Conference - scheduled for 4 PM .....Televised on Fox News....
  13. Law Enforcement
    RUSH TRANSCRIPT: MAYOR DE BLASIO HOLDS MEDIA AVAILABILITY AT MT. SINAI UNITED CHRISTIAN CHURCH ON STATEN ISLAND Mayor Bill de Blasio: We've just come from a meeting of clergy, and elected officials, and community leaders here in Staten Island. And there's a lot of pain and frustration in the...
  14. Reloading
    I'm always looking for things to make my reloading easier... Was in Costco today and found a set (3) of clip on My Lights. They are about 4-5 in and fully adjustable, run on 2 buttons batteries, with a nice c type clip on one end. Set came with spare set of batteries for each... $12. Run time...
  15. Chit-Chat
    So I am getting ready to start reloading 9mm, I have a friend who wants to reload his .308 but does not have space to put a press.  Is there a good single stage that I could setup on my bench that could accommodate both calibers, making the changes relatively easy - dies, turrent's, etc.....
  16. NY Specific Discussions
    http://www.legislativegazette.com/Articles-Top-Stories-c-2014-04-07-87484.113122-Lawmakers-pushing-for-further-gun-restrictions.html Even inside the building the press slant isn't 2a supportive Sent from my iPhone using Tapatalk
  17. Reloading
    I reload my rifle ammo with a Lee hand press. It's slow and a bunch of work but it fills my needs. Now I'll be reloading for pistols (mostly 9mm) in Washington State and I'm wondering which press, as I shoot a lot more ammo at a range session than I do with rifles. I'll probably stick with...
  18. Open Shout Out!
    The only other place I saw to put this was US govt news but that's 2A only so I'm putting it here. Obama losing approval? While preaching about individual rights? Omg how could this be Haha too funny
  19. AR - [Rifles]
    Does anyone have a drill press in their garage I could use for a few minutes? I am working on something, did it by hand to practice, but a drill press would be easier and cleaner. I am in Port Jefferson Station. Will post pictures later on, still need to get a few things, I believe its a...
1-20 of 43 Results
Top