Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. Car / Truck talk
    Anyone have one of these tools to lend. Long story, just gotta get one lug nut off of my Jeep.
  2. Out of State Crimes
    Dumbass. But read the comments. How vile. How did it get to this? http://www.rawstory.com/2016/03/gun-loving-florida-mom-shot-by-4-year-old-son-hours-after-bragging-he-gets-jacked-up-to-shoot/comments/#disqus
  3. Open Firearm Discussions
    https://www.bostongl...Ld5L/story.html To the man I sat next to on my way in to Boston: When I boarded the commuter rail, you were already in the midst of a spirited phone conversation and didn't seem to care about how loud you were talking. You were talking with someone about the Paris train...
  4. AR - [Rifles]
    Just wanted to see if anyone had an extra barrel nut laying around before I go and pick one up from DSI. Thanks!!!
  5. AR - [Rifles]
    This is my first build. I picked up a hand guard from trinity force. It has a non adjusting smooth barrel nut there is no way to torque it. You use an adjustable wrench to tighten it. Is this ok? I've people not using a torque wrench in some videos but I just wanted some experienced...
  6. Other [Rifles]
    http://www.fieldands...=NjAzNjY0MjEwS0 January 29, 2015 Petzal's SHOT Picks: Best New Rifles of 2015 by David E. Petzal 45 First, a few random notes. My lack of comments on the past couple of weeks' posts was due to the fact that every several months or so, my MAC decides that my...
  7. AR - [Rifles]
    Hey guys have a yhm free float and have the barrel nut torqued to spec but refuse to spend 30 bucks to buy their wrench to tighten the jam nut. I have a dpms tool but it won't fit the jam nut. I tightened the jam nut by hand than a set of channel locks which scratced the crap out of the jam...
  8. AR - [Rifles]
    I have a end plate and castle nut I picked up from dsi and the end cap from the magpul fixed stock doesn't seam to fit over the castle nut and end plate too well.. Do I need a specific magpul end plate and castle nut ? Or just some old fashion elbow grease to get it close to the castle nut?
  9. Pump [Shotguns]
    I do this too often, over-tightening nuts and bolts while doing repairs on my car, and various other places, too. Now, it seems every time I go to break down my 870 to clean it (before and after a match, for example), I'm struggling to get that damn magazine tube nut loose. It's knurled, so yeah...
  10. Chit-Chat
    So they can say what they want and just knock your door down this is just great.. http://www.latimes.c...0,7674608.story SACRAMENTO -- Gov. Jerry Brown on Wednesday signed legislation aimed at taking handguns and assault rifles away from 20,000 Californians who acquired them legally but have...
  11. Chit-Chat
    Rich slum dogs Even wealthy can crash at shelters: Mike By DAN MACLEOD Last Updated: 3:12 AM, March 9, 2013 Posted: 1:09 AM, March 9, 2013 Bill Gates would probably prefer the Waldorf. Mayor Bloomberg yesterday put his foot in his mouth by suggesting homeless shelters are bursting at the...
  12. AR - [Rifles]
    I need a castle nut wrench for my RRA, Do any of the local shops carry them?
  13. Chit-Chat
    Another entertaining video from MrColionNoir ....
  14. AR - [Rifles]
    Do you torque the castle nut, stake it, use blue loctite or some combination of the three? I searched the net for a correct torque setting and still not sure if it's in in/lbs or ft/lbs. This web site says it's 40 in/lbs whereas other sites are adamant that it should be a ft/lbs setting...
  15. AR - [Rifles]
    Pieces for my new build are coming together, but this is the first time I will be building the upper. Just ordered the barrel last night, but didnt see anything about whether it came with a barrel nut. Should I be expecting one or should I be ordering it?
1-17 of 18 Results