Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 43 Results
  1. AR - [Rifles]
    I am looking to sight in the AR I built with my 3-9x40 scope. The rings I have are too short and the scope ends up too far back. This is just a temporary setup as I am going to install a red dot on it afterwards. I just want to see what this thing can do at distance. MY eyes are not good...
  2. Other [Rifles]
    Following the recommendation from Henry, i purchased a Weaver 63b base for my new Henry lever gun. Long story short, i don't like it. I've always preferred Picatinny style rails. Can anyone recommend a well made Picatinny rail that will fit the 63b mounting holes? Any help is appreciated.
  3. AK - [Rifles]
    What side mount do you recommend for my Saiga? Looking at the scope below. A direct link would be great. Thanks http://www.primaryarms.com/primary-arms-4x-compact-prism-scope-with-the-patented-762x39300bo-acss-reticle/p/kt-pac4xak300bo/ Will take recommendations on a different optic too.
  4. Home Security / Safes
    I found the "shotlock" online but wondered what folks had experience with. Right now I just need to elevate off ground level, but in the future I am looking for EASY but child-secure access. thanks!
  5. Milsurp [Rifles]
    I will say after setting up the iron sights on the sweed m-96/38 at 100 yards all I needed was to order a taller front sight,The gun now shoots the first bottom mark on the circle rear sight that is at 200 meters (I Think) . 217 yards I have it set up shooting 1" high at the 100 group size 5"...
  6. Product Review / New Products- Open Discussion
    ARmA 15 Wall Mount Posted 23 hours ago in AR-15, Companies by Nicholas C ARmA 15 has made a lockable wall mount for a standard AR15 rifle. The gun is inserted into the ARmA15 wall mount and using a padlock, the gun is secured. Even if someone were to rip the wall mount off the wall, the gun...
  7. Optics
    I just ordered my scout mount for my Finnish M39 SKY 1944 Mosin Nagant from S&K Scope Mounts, PA. http://www.scopemoun....html?main.html It was a long shot calling them today but they were there working and guaranteed it shipped in a few days. Gotta love that!! Can't wait to mount my scope...
  8. Car / Truck talk
    I could use 6 tires mounted. No hurry Thanks if you can help.
  9. Chit-Chat
    On this day in 1943: US-Canadian First Special Service Force takes Mount La Difensa in Italy. The battle for Monte La Difensa, which took place between 3 December and 9 December 1943, occurred during Operation Raincoat, part of the Battle for the Bernhardt Line during the Italian Campaign in...
  10. AR - [Rifles]
    Aero Precision Ultralight Scope Mount Posted by Timothy G. Yan Aero Precision, a major manufacturer of AR-15 and AR-10 receivers, has recently started making 1-piece scope mounts for the AR-15 and AR-10 style rifles and other types of black rifles. Based in Tacoma, Washington, Aero Precision...
  11. Other [Rifles]
    Looking to put a sling on my JM 30-30 lever and have a question. Bought the Uncle Mikes kit that one just installs over tube, but the other end is that wood thread steel post that you're supposed to drill a hole in stock and then screw in. I don't want the post to be permanent and always...
  12. Gear Discussion
    What mount do you recommend for a Nikon Prostaff (1")? Rifle it will be on (minus the scary pistol grip and standard capacity magazine): This one - http://www.burrisopt...com/arpepr.html pops off while I'm shooting haha. You can pry it off with your hands too...live and learn I guess.
  13. AR - [Rifles]
    So the other day I picked up this product honestly for no other reason then it looked kind of cool and why the heck not now obviously being a big fan of A2 rear sites it works well for me as iron sites and although adding a bit of weight it feels great as far as balance is concerned. Just...
  14. Reloading
    Fabricated an above bench mount for my new Hornady progressive. Came out nice and solid for half the cost of buying one, and gave me an excuse to use my welder that's benn sitting idle too long.
  15. Semi-Auto [Shotguns]
    Picking up my 1st semi shotgun soon. Looking to add a 6 shell holder, what are you 930 owners using/recommend? http://www.dark-storm.com/index.php?dispatch=products.view&product_id=886 Some holders I'm looking at. http://www.gggaz.com/mossberg-930-side-saddle-shell-holder.html...
  16. Open Firearm Discussions
    hi purchased this "oem" scope mount for a 10/22 and it doesn't look like the scope mount that came with my 10/22 (have a couple all the same mounts), this one uses new screws and only 2 screw holes line up.... can anyone tell me if this is a Ruger oem, thanks http://www.ebay.com/...984.m1439.l2649
  17. Semi-Auto [Rifles]
    I think this has been covered before .... Mounting a weaver type scope rail to a stainless 10/22. Mount keeps coming loose. It looks like the forward most screw hole only has 1 or 2 threads. Drill & tap next inch size? 8-32 or metric?
  18. Revolvers [Handguns]
    I just ordered a jackweigand scope mount for a 6in gp100 and in typical fashion I'm asking for opinions after buying. Anyone purchase one from them or have one installed? How do you like it? Does it fit perfectly? Pain in the butt to install. I saw the videos but sometimes they are never as...
  19. Open Firearm Discussions
    Hi All, I am looking for a camo base and quick removable mount for my new super vinci.... Any recommendations Mark
1-19 of 43 Results
Top