Long Island Shooters Forum banner
1-16 of 16 Results
  1. Chit-Chat
    Looking to have some things done to sled and prefer not to have to bring to a shop...its an arctic cat
  2. Car / Truck talk
    Shut Up ! Take my money!
  3. Motorcycles
    Hey guys I am having some trouble with my sons 02 Honda 250ex. I picked up the bike for my son. I checked the oil after I picked it up and it was almost empty. I topped off the oil then decided to do a full oil change. it goes into first and reverse fine but to shift the gears up to the next...
  4. Chit-Chat
    I have a skidoo with a bent "nun"... Thinking of having a very competant mechanic friend fix for me but he is not a snowmobile guy... Anyone ever replace this before? or recommend someone who has?
  5. Car / Truck talk
    I have a 99 Ford F150 with a 4.2 V-6engine, She sounds good when it idles but when I accelerate I hear a tapping that has gotten progressively louder in the last couple days...While on the highway and I give it gas it taps loudly but when i take my foot off the gas, the tapping stops..and...
  6. All Other - Open Discussions
    Two 350 crusaders. Carbed, Boat ran fine all the way out to the ocean.. Holding the motors at 3000 rpm. One starts bouncing rpms 1000 shoots up to 3000 back down to 2000 back up to 3000 .. stall. Let the boat sit. start it up.. runs great for ten minutes then the same thing happens. repeat. We...
  7. DIY - Home Improvements - More
    the wife today started closing the garage door and didn't think she was pulled up enough so she grabbed the door to stop it(electric opener)...It must of stripped the gear in the part that rides on the screw drive where you would pull the cord to disengage? It will not re-engage...is there some...
  8. Car / Truck talk
    I need a NEW (not rebuilt) 4R100 for an 02 4x4 7.3L diesel. My mechanic (who i trust) was telling me the new factory Ford ones are improved and updated. I would prefer to go aftermarket but dont want to spend $4600+ on an ATS. hoping to stay around $3500 for the unit with converter. Truck is...
  9. Car / Truck talk
    Good morning guys, I had an oil change at a reputable national chain a few days ago, I guess it was last Thursday. First off, let me say I've had this car since it was new, it's a 2003 Hyundai Santa Fe with only about 45,000 miles on it. It's been well cared for since day 1 and has never been...
  10. Digital Connection (computers / phones / tablets)
    anyone actually work on phones? it a samsung nexus...may not even be worth it...
  11. Car / Truck talk
    Looking to buy an 03 A4 with a 1.8t. It has 70k on it and was dealer serviced. There are two codes stored in the system. code 1 is Intake camshaft position actuator open bank 1. Code 2 is system to lean bank 1. Any info would be greatly appreciated.
  12. Chit-Chat
    So I was cleaning my toolbox at work this morning and thought about how many wrench turners we have here. A lot of us take a lot of pride in our tools and tool boxes. They pay the bills! Maybe you even have a nice home setup. So lets see'em! Here's mine.
  13. Chit-Chat
    I need someone to do a complete tune up on a outboard and detail my boat for me. I'm sick of dealing with the mechanic at the marina. pm me, thanks
  14. Car / Truck talk
    I have been working on cars for years, I build em race them fix them. Motor swops trannys etc. I am quite frustrated I am working on a mazda that will not start. I am getting no spark. Just one initial spark that's it. I ohmed out crank and cam sensor , check main relays and fuses all good...
  15. Chit-Chat
    I bought an 06 jeep Cherokee. 6cyl, auto, 88,860 miles now. Just got an oil change at jiffy lube. They finished up and went to pull the truck out. It wouldn't go into any gear. They said it was making a ticking noise from the transfer case. No fluids are leaking and everything was filled. Told...
  16. Chit-Chat
    So it's been a long time since I worked on cars (I am a diesel mechanic at a golf course). I did rear brakes on one of the asst. superintendents cars the other day. 2009 VW Jetta. All I did was swap the pads. Rotors were in good condition. Yes, I used the special tool for turning and compressing...
1-16 of 16 Results