Long Island Shooters Forum banner
issue
1-18 of 78 Results
  1. Open Firearm Discussions
    For black gun owners, bearing arms is a civil rights issue Recent incidents involving black gun owners have revived an old debate Views are still mixed, but blacks increasingly see gun ownership as positive The NRA takes small steps to appeal to blacks; critics call it tokenism ...
  2. BBQ/Recipes/Cooking/Food/Diets
    Is grade A better than grade B? I've always went with grade A before.
  3. Bolt Action [Rifles]
    Apparently this is a common and problem and all the fixes I found were not solving my problem. Hoping someone here can help before I resort to a gunsmith. Took the bolt out to clean the rifle, separated the firing pin from the assembly to grease it. Safety went into the FIRE position from...
  4. DIY - Home Improvements - More
    I need to get something done on my property and I'm not sure who or what type of trade would do this sort of job. The back of my property slopes down as it meets my neighbors property line. It probably drops 2 feet over a 3 foot span. We want to have a fence installed and want to see what would...
  5. NYS and NYC Discussions (licensing/laws)
    Dark Storm posted this on Facebook, moments ago: http://wnep.com/2016...l-permit-issue/ I had to laugh because this means that certain Pennsylvania residents now have more rights in our state than we do. TOWANDA -- An agreement between sheriffs from neighboring counties could change who can...
  6. AR - [Rifles]
    This post is a bit long but I am trying to be complete and would like to know if anyone else has seen this problem. I have an issue with my Stag trigger disconnector timing causing it to drop the hammer on reset frequently. I really wanted to buy a Stag 1H but Stag was at least 3-5 weeks...
  7. Semi-Auto [Handguns]
    As you guys know I'm in love with my M45A1. Sadly the finish wasn't holding up like i expected. Colt does have a one year fit and finish warranty so I decided to take advantage of it. Pistol is my favorite shooting 1911 ever. So I decided before calling Colt up directly I dwell on the 1911...
  8. Semi-Auto [Handguns]
    Hey guys. I bought a NIB M&P40 F/S several months ago. About two months ago, I installed the APEX USB and SEAR into it. I just noticed recently that the striker block is not doing its job. I am able to push the striker so that the firing pin enters the breech. Even if I pull back on the striker...
  9. Reloading
    My .45 ACP reloads (Zero bullets, 230 Gr RN) have not been fully chambering and are difficult to extract in my M&P. I went through several iterations of chasing the usual suspects: - My OAL was in spec and matched Freedom Munitions 230 gr RN that feed flawlessly. - adjusted and re-adjusted...
  10. Milsurp [Rifles]
    So, I posted before about finally getting my k98. This weekend, I went to the range to run a few rounds through it. Loaded it up, cycled a round...... Bolt wouldn't lock down into battery, tried another cartridge, same issue. Tried it with 3 different ammo brands (one being a few milsurp...
  11. Open Firearm Discussions
    Maybe, Maybe Not. If you can't or won't watch the whole thing (I highly recommend that you do), then at least watch from the 49 minute mark on.
  12. Home Security / Safes
    Issue Box from Tactical Walls Issue Box from Tactical Walls By Matt on June 1, 2015 in Guns The folks at Tactical Walls have a gift for hiding firearms right under your nose (you'll get that joke in a moment). Their newest discreet firearm storage product is the Issue Box, a cleverly designed...
  13. Semi-Auto [Handguns]
    Well, partner and I picked up our 43's last week. Guns are a serial number apart. Partners gun runs well, only one FTE in over 200 rounds. I had 2 FTE's in as many rounds, but encountered a more serious problem. One of the two mags shipped with the gun hangs up halfway when inserted into the...
  14. Break Action [Shotguns]
    The selector for extract/eject is broken. It took a piece of it. I thought these guns are more reliable. It's set to extract mode now. I gotta send it back to Beretta now. How long should it take?
  15. Chit-Chat
    & yes, I see the video's title, but this was the best source that I found.
  16. Recalls
    Weatherby issue recall for model that can accidentally discharge 3/23/15| by Daniel Terrill The Weatherby SA-08 semi-automatic shotgun chambered in 28 gauge. (Photo: Weatherby) Gun maker Weatherby, Inc. issued a safety recall on March 21 that covers a limited number of Weatherby SA-08 model...
  17. Car / Truck talk
    I have a 2011 Chevy Traverse with less than 30K that experiences power steering failure at low speed or parking maneuvers. Checked the web and found a host of complaints regarding this issue with most having to replace both the rack and pinion and power steering pump, not covered by any recall...
  18. Semi-Auto [Handguns]
    This post is not much more than a shameless show-off bragging opportunity. Can't really tote this around and show it off to friends and family. As cool as it is being old military memorabilia, it's still a working gun, so it needs to be treated as such. I can't frame it and hang it on a wall...
1-18 of 78 Results
Top