Search Results for ‘hornady’

Please do yourselves a favor and DO NOT BUY THE HORNADY POWDER DISPENSER/scale! It is a HUUGE POS! I have looked online at many different shooting forums and also YouTube videos and it turns out that my experience is not unique. This thing sucks, it is inaccurate, & not worth $1. I only...

So looking into a bullet feeder die and thought I was sold on the hornady .45acp but am now thinking the rcbs may be a better buy. Hornady is caliber specific and plated only. Rcbs is adjustable for 9mm .38/357, 40 and .45 (I load 3 out of 4) and can use lead with cleaning. Also comes with...

Cabelas has it for $389 I've got a $25 off coupon which offsets tax. Anywhere got it cheaper...

I don't know if this is new (the MidSouth Shooters Catalog indicates it is), but Hornady has a deluxe electronic control panel for the Lock-N-Load progressive press that: "Includes: Digital Readout Panel Wire Harness Cycle Counter Primer Slide Sensor Powder Safeguard Die...

Hope i made the right choice. was not happy with the primer system on the hornady. i here the dillon also has issues. should be arriving Wednesday. will let u guys know how it goes. anyone here make the change or go the other direction dillon to hornady. please let me know your experiences

Hard to find .22's ?? or any other ammo?? Steve Hornady explains...

Well thinking of adding a case feeder to my LnL AP , I run into a issue because I have only around 38 " in height clearance from bench to a overhead storage area.  Anyway that the feeder can be shortened , my understanding is its around  41"  in height from bench to top.   Then a...

I got these today in the mail. Lock n load rebate.

anybody have the automatic case feeder for the hornady LNL Thinking of adding it. I would use it primarily for reloading 223 And later on if i get my pistol license for 44 mag and 45 and 9mm

1911 Primer Tube Filler Posted by Richard Johnson Another NASGW show announcement from Hornady is the Lock-N-Load 1911 Auto Primer Tube Filler. The pistol shaped device is a semi-auto method of loading trays of 100 "]primers into a tube designed for the Lock-N-Load loading press made by...

finally found a slug my Mossy 500 12 ga.shotgun does not like. anyone else ever have problems with these ? looks like I will be offering a "sell or trade" as I have a few boxes.

Fabricated an above bench mount for my new Hornady progressive. Came out nice and solid for half the cost of buying one, and gave me an excuse to use my welder that's benn sitting idle too long.

Product Warning and Recall Notice: 90226 Hornady Mfg Company is recalling one (1) lot of 9mm 135gr +P Hornady Critical Duty™ Ammunition, Item#90226. This lot was shipped between the dates of 6-5-14 and 7-16-14. Item number 90226 LOT # 3141635 Hornady Mfg Company ballisticians have determined...

I'm having an indexing issue with my press. It seems that every 5 pulls it will wind up off center by not fully indexing I'm not really sure what is going on. This is a brand new press any ideas? I know that there are adjustment pals and such but it seems as the shell plate is not fully...

I'm having issues trimming my fl sized brass.. I'm using redding fl sizer with bushings. I can't seem to fit the case in the trimmer with the .30 cal pilot. Neck tension is too much. I am using .334 bushings. Neck won't fit over the pilot.. Anyone have remedies? Besides trimming without the...

Hornady pays $61,000 in bonuses to employees in $2 bills 6/20/14| by Chris Eger 28 643 Jason Hornady, vice president of sales and marketing at Hornady Manufacturing, in red, with 30,500 $2 bills and a collection of Hornady employees just before bonuses were issues. (Photo credit: Barrett...

At a glance it looks like Graf's has some deals here on bulk Hornady bullets. http://www.grafs.com...ds/HORNADY BULK

Has anyone used the bullet feeder die with a tube attached , does it increase output.  Don't wanna spend  the cash on the whole plant , but if the tube drop works I'm thinking about it.    Not a expert at juggling case and bullet yet .

Still working out the kinks of my new press are you suppose to cam over at ever station or just the seating/crimp, when I cam over at the powder/ expander the bell sometimes gives it a little yo much flare.  

Well still getting the hang of my new hornady press, and i have it in my garage but the cold weather seems to make the grease all hard a less  slick . Can this effect the indexing and operation.  Needless to say getting this to index correctly is a PITA..