Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 65 Results
  1. Gun Stores & Gunsmiths
    Hi, any recommendations for a gunsmith near Brooklyn? I am looking for someone to drill, tap, and mount a picatinny rail on my Benelli M2 receiver. thanks
  2. Gun Stores & Gunsmiths
    Hey all, Looking to see if there's someone with a MGW sight pro tool or a gun smith who can install my sights on my VP9. Let me know Thank you Andrew
  3. Open Firearm Discussions
    Does anyone know a gunsmith that does Duracoat finishes for rifles? I've been having trouble finding a gunsmith on Long Island that does.
  4. Other [Rifles]
    I've got a 1948 39-A Marlin 22 handed down from my grandfather/father to me. It's misfiring (leaves small dent in cartridge but not always firing). I suspect it just needs a good tune-up.... or? Anyone know of a LI gunsmith that knows this rifle, can have a look at it?
  5. Gun Stores & Gunsmiths
    I need a recommendation for a gunsmith other than Country Gunsmith to do some stock work that will require milling experience with in reasonable driving distance 2hr at most. I am look for some one to install the Badger Ordnance Embedded front rail into a McMillan stock on my GA Precision M40a3...
  6. Gun Stores & Gunsmiths
    I am getting a m82 and need a gunsmith to remove the muzzle device and switch out the grip for me before I take position of it. I remember there was a place that people would send ARs to get pinned and wielded. Anyone recommend a place. The store which was mentioned in the first paragraph was...
  7. Gun Stores & Gunsmiths
    Had a problem with my shotgun, took it to Country Gunsmith in Bohemia and he took care of it right away.
  8. Semi-Auto [Handguns]
    Hi All. Can you guys recommend a good and reliable gunsmith to work and upgrade Glocks. Preferably close to NYC. I Thank you in advance... Simong.
  9. Semi-Auto [Handguns]
    What's the process now for sending a pistol to a gunsmith
  10. Semi-Auto [Rifles]
    Hi All, can anyone recommend a gunsmith who is proficient in the Kriss Vector Carbine?
  11. Gun Stores & Gunsmiths
    Hello. Need some input from you, guys. I need a gunsmith that has the ability to test fire the repaired/altered weapon. The weapon in question is a 12 gauge pump action shotgun. And it needs a gunsmith, meaning I can't fix it myself. Personal experience based recommendations preferred. thank...
  12. Gun Stores & Gunsmiths
    I always need to give credit when it's deserved. Despite the negative posts I've seen on Bob @country gunsmith, I still decided to take my mosin nagant 91/30 there to get the rear sight removed. After a few hours of hacking and banging of my rear sight, I realized I needed professional help. I...
  13. Gun Stores & Gunsmiths
    I want to get the barrel cut down, bent bolt installed, scope mount installed and rear sight removed. I know all of this stuff could be done at home with basic tools but since I can't even nail two boards together without making a trip to the ER, I figured a gunsmith is the way to go. I...
  14. Gun Stores & Gunsmiths
    LGS purchase handgun. Fired a 100 @ target. Shooting left of center, similar result with another experienced shooter who said to have the LGS gunsmith adjust it. Sooooo, should I expect to be able to wait for the sight adjustment or leave it st the shop and should I expect to be charged? Just...
  15. Milsurp [Rifles]
    I have send a rifle to a gunsmith for barrel change. Do i have to go thru an ffl to send it?
  16. AR - [Rifles]
    So for those of you who you who followed my previous threads detailing my woes dealing with Country Gunsmith and the ultralight build I was doing, you know the result abortion of an upper I was left with. I decided today to bring that upper to DSI and see what kind of magic they could work with...
  17. Gun Stores & Gunsmiths
    Went today but closed. I want to know what's their store hours ? It's by Ocean ave Thanks
  18. Gun Stores & Gunsmiths
    A member wants to remain anonymous but would like to shorten his barrel of his AM Enfield. Who do you recommend?
  19. Gun Stores & Gunsmiths
    Brought my Robinson XCR barrel into Bob to have it neutered for (un) Safe. He cut off the threads and the pinned and welded muzzle brake and fashioned a cover. Looks great, as all his work has since I've been dealing with him for the past 25 years. PS the attachment point is the thin line 1...
1-19 of 65 Results