Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 328 Results
  1. Semi-Auto [Handguns]
    Picked up the Walther PPQ Q5 Match today from DSI. Have had my eye on it for about a month or so decided to pull the trigger (so to speak) today. It's basically the same thing as my PPQ M2 only it's ready for optics mounting. I'd been looking at the Glock 34 for a bit but NOT a huge Glock fan. I...
  2. Chit-Chat
    I went to Sagamore Hill recently and really liked Teddy Roosevelts Springfield 1903. Thats where the gun bug bit me. I have been considering acquiring an old Surplus type rifle. I looked around online and found those 1903's to be pricey. But im not sure if those are collector models or maybe I...
  3. Milsurp [Rifles]
    I was at a gun show and saw one of these sitting on one of Sarco's tables. They gave me a price too good to turn down (120) and added an original Remington Barrel for another 120. I fell into a bit of luck and was able to send my barrel off to be nitrided (we were sending out a bunch of...
  4. Chit-Chat
    I dont remember when did I send this, probably here with recommended link, anyways... got this in the mail and thought I'd share it with you lovely people. I
  5. 4X4 -Enjoy the offroad! / CB Radio Area
    Thanks to (forgot your name) for recommending Big Power Racing. They finished my 6" lift today on my 2015 F-150. It's a 6" Fabtech Basic Kit running 20x9 Fuel Vapors and 35x12.50 Nitto Terra Grappler G2s Rides better then factory believe it or not.
  6. Chit-Chat
    I was taking apart my 686 for a cleaning after a trip to the range and after removing the yoke/cylinder found a spring laying on the table. It had a small pointed metal protrusion which I couldn't identify. I went into an exploded diagram and couldn't find the part. Upon visiting a You Tube...
  7. Semi-Auto [Handguns]
    Finally got my Ruger 22/45 Lite in my hands. My father had to put some JB weld over the pin to make it compliant. I think he also filled over the pin with solder. You can see from the end of the receiver how it's discolored from the heat (which I'm fine with, helps prove my case that it's...
  8. Semi-Auto [Handguns]
    So I originally learned how to shoot a handgun with a G23, but haven't shot another Glock in 14 years. I had my eye on a Burnt Bronze colored G19 at my local gun store, decided memorial day was a fitting time to buy my first Glock to put something meaningful behind the purchase. Took her to the...
  9. Open Firearm Discussions
    I pulled up to the Taco Bell in Hempstead ordering screen to see this. The screen is after a turn, so no one can speed through and there is a large patch of grass before the road so I don't think it was a pebble. Taco Bell didn't cheap out on the glass for the screen. That thing is bulletproof.
  10. Chit-Chat
    Holy Bat Guano! With the healthcare cost increases over the last 4 years I am back to a 2004 level salary. Welcome to wealth redistribution. I need to start speaking more Spanish and making liberal (pun intended) use of the ER.
  11. Semi-Auto [Handguns]
    Last week I was frustrated with not getting my pistol permit so I went out and got a new rifle. Yesterday I got a call to pick up my permit. I needed to get a gun since I have a permit. Ended up with 2 pistols. In the past week I got 3 guns. The pistols are a glock 40 and Springfield 45.
  12. Law Enforcement
    I wouldn't post this on the other side. I am truly amused by all the stuff getting posted in the forum about "violating rights". I had a professional interaction with a Highway officer. In other words I got pulled over. Driving home from work the other night about 3am on Nicholls road. I had the...
  13. Chit-Chat
    So i got a phone call just now. The person called me in a serious tone and an ethnic accent (PC haha), asking me if i got the letter from the IRS about money i owe. I said yes (it was true, i did owe money ($400), and I took care of it, and think i might have given them my cell when i sent...
  14. Revolvers [Handguns]
    Literally I got wood. I've been planning on making a set of grips for my Uberti Frontiers 1875's and found a peace of wood that will ad some sex appeal to my girls. I think their going to look real perty when they're done
  15. Chit-Chat
    Just got back from a week in Florida. MAN I miss carrying my firearm on me. So we flew out of JFK. No issues at all. Went to Jet Blue, let them know "I need to declare an unloaded firearm". They filled out two tickets that I signed. PAPD was called. Showed up within about 5 minutes. Guy looked...
  16. Semi-Auto [Shotguns]
    Semi Auto .410 shot gun that is! I have been looking from time to time for a semi auto .410 shotgun and I am seeing prices like 1000-2000 bucks! Whoa! Is that what I cane expect? I see a few that are 3-500 but they are not semi auto. Will I have to keep dreaming about a semi-auto .410? or is it...
  17. Semi-Auto [Handguns]
    I was in the right place at the right time and got my mitts on the Sig P320 Full in 9mm today and despite my liking my guns made from metal I'll admit that I was impressed. Quick and relatively inexpensive change of calibers if that's to your liking. Nice trigger. Really nice. Simple as pie...
  18. Out Of State Licensing
    While it's not HERE yet in my hands... it was mailed out... Your license was issued on 02/17/2016. Please allow approximately 7-10 business days for your license to be printed and mailed. If you do not receive your license within that timeframe, please contact us via live chat or call our...
1-20 of 328 Results