Search Results for ‘floor’

Have one bedroom looking to get sanded and 2 coats at least of polyurethane. 12x12

Anybody have a source for basic replacements? Not looking for magpuls. Just want to replace some of the super soft ones that came on some panic bought cheapies. Brownells has a 10 pack for $8.99, but $7.95 to ship seems a bit excessive.

I'm bolting a safe to a concrete floor and decided on drop-in anchors and grade 8 bolts. I've never used them before so I i was looking for some advice. The ones I got are 2" long and have an insert about half way down that will push down as you thread the bolt and flare out the ends of the...

Tango Down/Vickers Tactical M&P Floor Plates Posted by Nicholas C Soldier Systems got a sneak peak of the new floorplates for the S&W M&P pistols magazines by Vickers Tactical and Tango Down. Vickers Tactical and Tango Down collaborated and made floor plates for Glocks. Well not the M&P...

Last year, in December, I painted my garage floor. Having never done this before, and reading all the stories about bad results, I read up on it. After reading about it, I thoroughly etched the floor. I brought the nasty chemicals at HD, and scrubbed **** out of the floor. Then hosed it off...

My Sons School Again. I wish they would make this much of an effort to get the drugs out of the schools before there is another overdose. http://patch.com/new..._campaign=alert A bullet was found on the floor of the boys' locker room at Lindenhurst Middle School Friday morning...

I have a shed in a yard in the Town Of Oyster Bay. The shed is vinyl and 10x12. There was a shed there when we moved in, and it is shown on the survey. When the concrete "pad" was poured for the floor, the installer dug down a bit and then compacted that ground with recycled fill, and then...

what happens with found money in your own home?...very old bills dating from the 70's up until the early 90's, multiple denominations from singles to hundreds.

Hey all, I have a 1999 Honda Accord, 4cylinder and I usually do my brakes but since my dad retired he's been doing most of the repairs on my cars. Anyway, one day after his brake job, I was driving around 70mph and when I hit the brake, the car's front end was shaking like crazy. Didn't know...

I am considering getting a deep floor safe primarily for fire protection for documents and contents not related to firearms. I am thinking about storing the contents in plastic containers to keep items dry and for organization. Most documents will be scanned and saved in computer files to assist...

Looking for different options to make the mags limited. I've moved my stuff to a free state, but would like to make a couple standard 30' s to limited 10's. Have plenty of 10's, just looking for options. I'm thinking mag blocks and then epoxy or jb weld the floor plates closed. Anybody try this...

I have an unfinished basement with rust stains from previous flooding. After cleaning the surface what type of grey paint should I apply? I'm looking to hide the stains and make it look neat/clean.

Half of the room is linoleum with a layer of vinyl tile on top. I need to finish the other side of the room with the same tile. How do I level the floor? It looks kinda like this ----____ what do I use to slope it. I need a quick fix. I know what the correct way to do the job but I need to make...

I've been seeing the comercials for them and I'd like to pick up a set when I get my wrangler. Are they good as they say? They are a bit pricey at 100 buck but I'm willing to pay for quality. Where I live and park I always kick up ton of sand in my vechicles and I like to keep a clean floor board.