Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 26 Results
  1. AR - [Rifles]
    Has anyone used AR-15 parts in a .308, I was told that many parts are the same. Can the buffer and spring work in an AR-10 ?
  2. AR - [Rifles]
    Question for those more knowledgeable. Does this DSI buffer tube look odd to anyone? Notice the view from the left side looking at the tube, the thread top looks flat, while the threads on the right side view looks well defined and pointed. You can see the difference in the threads in the...
  3. Milsurp [Rifles]
    Well I was ordering some stripper Clips on amazon and saw this little peace of polysomethingorother. For 9 buck free shipping well I remembered how I like the one I put on my 10/22 so I said what the hell and order it. Here my install. Pretty small piece of poly use a spent case turn the...
  4. AR - [Rifles]
    If one was to build an AR Rifle (not a Pistol) with the Phase 5 Hex-2-C Pistol Buffer Tube Assembly, Spur Grip, Henry Trigger Guard, 16" non-threaded Barrel (end is just blank, no suppressor or anything attached), and the OAL of the Rifle is 30.5"....would is still fall in the NY Compliant...
  5. AR - [Rifles]
    Had the new AR out to the range again today and it runs great. Much better than myself! When I was cleaning/lubricating it and I noticed dents/dings in the recoil buffer face and was wondering if that is typical or not. If it is not typical what can I do to fix it? A picture of the dents is...
  6. AR - [Rifles]
    Looking to pick up one of these FRS-15 stocks but am unsure if I need to pickup the recoil kit as well. Anyone know if the buffer tube and guts of the skeleton stock work with it?
  7. AR - [Rifles]
    The buffer spring "Twang" on my rifle length build is starting to bother me. Any advise on how I can reduce this? Anyone try this chrome silicon spring wire for $8: http://damageindustr...er-action-rifle Or the expensive JP option: http://www.jprifles.com/ (Rifle...
  8. Semi-Auto [Handguns]
    I have been looking all over for buffer spring recoil pads for my sig P226. Does anyone have any idea where I can find them? I have been looking all over. I have them for my 1911, but can't find any for my 9mm sig. Nazza315430
  9. AR - [Rifles]
    Recently bought a used stock that came fixed to a mil spec buffer tube, installed it on an ar15 lower, dropped the spring and buffer in and function checked and the bolt was traveling rearward to the point the gas key was hitting the lower. So I dropped a quarter in to see if that made a...
  10. AR - [Rifles]
    My buddy completing a build and needs a milspec buffer ASAP. We took a ride to DSI and they ran out. Any other locals that carry them? Jerry's also out of stock. And apparenty Dicks doesn't carry them. He wants to finish the build before Sunday range day.
  11. Milsurp [Rifles]
    Wondering if anyone has opinions on those buffers they sell for SKS bolts. I have a very gently used Norinco. I was cleaning it up after a trip to the range and noticed the back wall of the receiver takes a beating during cycling. Are these rubber buffer stops usable or do they create problems?
  12. AR - [Rifles]
    Anyone try one of these? I'm considering one for my New Frontier polymer AR to ease the stress on the lower. Thoughts/experiences? http://www.buffertech.com/Crosshair-AR-15-Collapsible-Stock-Hydraulic-Buffer-P318.aspx
  13. AR - [Rifles]
    Thorsden Customs' AR Pistol Buffer Tube Posted 16 hours , Rifles by Nathan S. For those in restrictive states, Thorsden Customs may be a very familiar name. Thorsden is the shop that created the one of the first compliant non-pistol grip AR stocks that now typify NY and some CA-compliant...
  14. AR - [Rifles]
    Tried to put my new thordson stock on my bushmaster tonight. Realized my buffer Tube is too dang long. Anyone know which size and where I can one that's the right fit?
  15. AR - [Rifles]
    I've never cleaned mine. Probably around 2k through it. Just wondering what others habits are. If you're a lunatic with cleaning your ar then I don't really care about your answer. Just looking for a realistic answer. How does a dirty buffer tube even negatively affect the rifle? It seems to me...
  16. AR - [Rifles]
    Quick question, I have 1 upper that has a mid length gas tube, the price was right so I snagged it from a friend. It doesn't seem to work right on one of my lowers. The one with a carbine length buffer tube seems to short cycle and not lock, the other one I think is a rifle length. I got that...
  17. AR - [Rifles]
    Anyone have one they are not using? I will pay for it, I can order one but I wanted to check with the local crew first!! Thanks all!!
  18. AR - [Rifles]
    Took my Rifle apart last night to change out the Buffer spring to a new piano wire one i picked up from Damage USA. When I pulled the Buffer out I noticed that there looks like the edge is hitting something and has knocked the edge down. Sorry no pics right now but I will take some later. I...
  19. AR - [Rifles]
    My upper should be here by Tuesday. Ive looked at stocks and buffer tubes. My only question is what buffer should I buy ? Its a carbine upper. Do I need a "matched" buffer ? Ive been told that the weight has to do with how it will cycle.
1-19 of 26 Results