Long Island Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 36 Results
  1. Jokes and more Jokes!
    A policeman is working his way back through the line of traffic. One of the motorists rolls down his window and asks, "What's going on?" The policeman replies, "There are a bunch of fascist left-wing anti-Trump protesters and they're blocking up traffic. They say that unless they get a million...
  2. Semi-Auto [Rifles]
    Guys I need some help. I hot me an ares scr and I want to install flip top sights. I have seen other rifles using the magpul moe handguard and they have a picatinni rail sitting on top of the gas block at the same height of the receiver rail. As a reference look for example the DSI featureless...
  3. AR - [Rifles]
    Does anybody know of a local store where I can pick up a low profile gas block. DSI is out and it is the only thing standing in my way of my first build. Any help would be appreciated.
  4. AR - [Rifles]
    With all the new slim rails out, is it possible to shave the front sight down enough to fit one of these slim keymod rails over it? Looks like chopping the top off wouldn't be enough. Has anyone done it?
  5. AR - [Rifles]
    I recently purchased this vice block: Vise Well Block for Lower Receiver; Reversible; .223 5.56; For Owner / Gunsmith / Armorer to Quickly Assemble/ Clean/ Repair Their Carbine Combo https://www.amazon.com/dp/B012HMBSC2/ref=cm_sw_r_cp_awd_SYgLwbB69XXQ5 It locks into the mag catch fine and will...
  6. Fishing - Open Discussions
    Heading to Block Island on Saturday morning for almost a week long vacation. I've never been there before. What should I bring? I will be staying at Camplins. I assume I will get the chance to do some surf fishing. Was also thinking of either renting a boat or hopping on a party/charter...
  7. Vendor Deals
    Hi guys, gauging some interest here. We had a member approach us asking about bioblocks for next winter. Basically compressed wood blocks that will burn longer than regular wood. They can be used in fireplaces and in wood stoves. LTL shipping on it for him is pretty expensive....each skid...
  8. Semi-Auto [Handguns]
    i would like to replace my barrel on my glock 41 so i can shoot lead bullets. this will be a competition gun uspsa. what brand of barrel do you recommend
  9. Semi-Auto [Rifles]
    Special Edition Barrett on the Auction Block Posted by Richard Johnson Barrett announced the company produced a custom version of the Model 82A1. The special edition rifle is set to be auctioned to benefit the National Rifle Association. According to Barrett, the rifle has the following...
  10. DIY Projects and Builds
    Ok, so for some background I have adequate experience with AR's in general & installing gas blocks. I have never had a misalignment before because I had always taken my time & used the jig that I made in tech class in high school(95'). Problem is the original was for a standard front sight gas...
  11. Out of State Crimes
    MO:People Block Street, Jump on Vehicle, Man pulls Gun Protesters blocked the street in the central west end of St. Louis. They surrounded a minivan containing a single white male, and jumped on the hood. The driver of mini-van took evasive action, spilling the hood jumper into the street...
  12. Car / Truck talk
    Watch for the chuckle at 7:30 into the video. Damn that car is cool!
  13. Bow Hunting
    Anybody have a BLOCK target?
  14. Open Firearm Discussions
    They would do more good by blocking the REALLY dangerous items such as Swimming Pools, Bath tubs, Doctor visits etc. etc. Beginning in September, Google plans to block firearm, ammunition, and gun accessory ads. According to Google Support's "Dangerous Products or Services" page, the company...
  15. AR - [Rifles]
    I'm trying to get the roll pins out of the gas block to replace the hand guard and they are not budging!! You guys have any tips?
  16. NYS and NYC Discussions (licensing/laws)
    http://readme.readmedia.com/Assembly-Democrats-block-SAFE-Act-repeal-legislation-in-committee/8418003 NOT unexpected; nevertheless another episode to ensure voters get out the vote.
  17. Open Firearm Discussions
    ok so i order mag blocks for all my 30 round mags. my question is. not only do i need to put them in. but i also need to make it permanent right? if so how
  18. Gun Stores & Gunsmiths
    Anybody know of a gunsmith/LGS that can remove an A2 style front sight post and properly install a low profile gas block, including dimpling of the barrel?
1-18 of 36 Results