Long Island Shooters Forum banner

14

  1. Semi-Auto [Rifles]
    Any one have an accu strut. Any preference to the 4 or 6 inch . The shorter has one clamp the longer has 2 Would love to hear your thoughts
  2. Semi-Auto [Rifles]
    I want to purchase a 10 round legal mag . Prefer Tapco if it exists or OEM. im skeptical on buying a pro mag brand i checked the usual cheaper than dirt, target sports mid use nothing but 30 rd I really want a 30 but us NYers are getting the short end of the stick any input welcome
  3. Semi-Auto [Rifles]
    Hi everyone, I wanted to share my new Mini-14 build. I had it built by Carl from accuracy Systems out in Colorado. If I can remember correctly I started off with a NY compliant Model 5855 blued Mini-14 with the 5 round mags then added these mods: Real wood American Walnut stock Upgraded hammer...
  4. Semi-Auto [Rifles]
    I decided to keep my Tactical Mini 14 in NC and not ship it back up to NY (The Safe State), so I went out and bought a new one, I'll be doing some work on it over the next week and will post some photos when I'm done, I appreciate the advice I got from you guys regarding the shipment of an...
  5. Gear Discussion
    I would like to get a few Ruger Mini 14 Magazines (.223),contact me in a private message please.
  6. Semi-Auto [Rifles]
    I found this 10 round magazine for my Mini14 (.223) in my equipment bag today that I had purchased on-line from Ruger about 4 years ago,I opened the package and noticed it didn't look quite the same as the 5 round magazine and it did not seat properly in the magazine well,take a look and tell me...
  7. Semi-Auto [Rifles]
    mini 14 flash hider legal in ny?
  8. Semi-Auto [Rifles]
    What's the best way to make the trigger group fit properly? Most of the reviews say the newer models of the Mini 14 say it has larger fingers in the Mag well, that make it necessary to either shave the metal or the stock.
  9. Open Firearm Discussions
    Went to Brookhaven today to test out my new Mini 14 in .223/5.56 and noticed the casings were searing hot from 1st to last shots. An ejection landed in the crook of my elbow and left a nice little mark. I've got a .308 RAR that doesnt get nearly as hot, i can remove the casings manually if I...
  10. Out of State Crimes
    "Shootings in 2016 are more than double the same period in 2015, according to data kept by the ribune. Killings are up 130 percent. As of Sunday, at least 365 people have been shot in Chicago this year and at least 70 of them have been killed." Read more...
  11. Open Firearm Discussions
    http://thefederalist.com/2015/02/24/14-things-everyone-should-understand-about-guns/
  12. Jokes and more Jokes!
    So don't go buying any green bananas.
  13. Semi-Auto [Rifles]
    Bought a new Mini 14, Ranch, with a wooden stock. I thought I was buying a cal. .223. The end of the receiver is stamped 5.56 NATO. Does that mean it can fire either or .223 / 5.56 ? The tag in the store on the rifle said .223 . The end of the box says 5.56 NATO. The salesman I spoke to last...
  14. LIF Sponsors/Ad Placements -Please Support them!
    We just received three of the new Mini 14 Ranch rifles in 300 Black out. These are blued frame and barrel with black poly stock and two 10 round magazines. NY state compliant. $799.95
  15. Semi-Auto [Rifles]
    I ran across this... http://www.shootingtimes.com/historical/history-of-the-ruger-mini-14/
  16. Semi-Auto [Rifles]
    http://www.shootingillustrated.com/articles/2015/1/9/the-mousqueton-amd-frances-mini-14/?utm_source=newsletter&utm_medium=insider&utm_campaign=1115
  17. Law Enforcement [QUESTION]
    Smile for the day.
  18. Open Firearm Discussions
    Got My mini 14 month ago. I used 5 round ruger factory mags, I used tulamo 223 steel case and reman 223 brass Issue #1: Inserted the magazine then released the bolt. The bolt would not close, looks like can't push the round into the chamber fully, so I had to pulled the bolt and released...
  19. Chit-Chat
    What's the over under on gang violence? Anyone thinking of going?
  20. Optics
    So my eyes tell me I need to put optics on this Mini. Lots of conflicting stuff on the Interwebz surrounding Ruger mounts. This is not ever going to be a tack driver, but I'd hate to err for the sake of a few bucks. Using OEM Ruger mounts, buying a set of rings and viola. Any opinions from...
Top