Well I just finished another Fixed mag build this time I used a DD's Ranch kit. here's my write up on it. It's a pretty simple streight forward kit I also order the rear takedown pin.
20171122_211826.jpg 142.43KB 35 downloads
Here it is the three pieces for the mag fix and the takedown pin.
20171122_211858.jpg 90.29KB 31 downloads
After removing the old mag release I drop in the new fixed mag plug for the loss of a better word.
20171122_211910.jpg 143.34KB 30 downloads
I added a little red loctite to make sure it all stays put.
20171230_142026.jpg 114.94KB 23 downloads
I put the screw in and flipped it over.
20171230_141948.jpg 111.93KB 22 downloads
Then place in the mag.
20171210_202623.jpg 133.84KB 21 downloads
Installed the mag retention bar. Bazinga it's done really took me more time to gather all the tool then to do the install.
20171122_212136.jpg 85.33KB 25 downloads
The rear takedown pin is quite nice and so far I like it more then some of the others I've used.
20171122_212150.jpg 75.3KB 21 downloads
First I removed the stock. Yes it's a rifle stock so if you have a carbine stock you'll need to follow the removal and installation steps for that.
20171122_212335.jpg 63.26KB 22 downloads
Next I removed the spring retention screw and dropped out the spring, detente, and old takedown pin. Then installed the new pin and reversed the steps.
20171210_202350.jpg 123.01KB 17 downloads
And I'm done with this dis guy. She look real nice.