Welcome to Long Island Firearms, Long Island's premier source for news and education!
|Welcome to Long Island Firearms, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be a part of Long Island Firearms by signing in or creating an account. You also have the ability to login with your facebook or twitter account. See the icons in the upper right hand corner.
Any good gunsmiths in Suffolk county
Posted A minute ago
Posted August 14 2017 - 07:04 AM
I've been using the two smiths, at Benson's Guns Shop, in Coram, for more than 30 years, without complaints. The son, Dave, has mostly taken over the smithing and I find him very competent.
- Landlubber likes this
Posted August 14 2017 - 03:06 PM
It's all about WHAT you need done. If you're looking for one like you see on TV (Gun Smoke/American Guns) that can basically build you anything you want from scratch... that might be hard to find. A lot of them here can custom build a rifle as you want it using parts off the shelf or some dealers (Dark Storm) who can fabricate/cut out their own pieces... so far i've found the gun shops I shop at have been able to handle all the basic stuff i've thrown at them (stuck bolts, stuck sights, sight installation, cleaning, painting, builds, etc...)
- Parashooter and Seancusmc like this
Posted August 15 2017 - 06:16 AM
Posted August 17 2017 - 11:14 PM
I have never had a good experience with a gun smith. to be fair I have only had 3 experiences though. Gunsmiths ruined a colt 1911 I had and the finish on one of my shotguns. My third experience was when I called a gunsmith and asked him to convert my NYPD DAO sig p226 to DA/SA and was quoted something like $300 plus parts. I did it myself in 20 minutes for $60 worth of parts (thanks youtube).
Maybe you should consider doing your own work with online help. But if you really think you need to hire a gunsmith, better check them out before you trust them.
Posted September 17 2017 - 06:35 PM
- Gunz23 likes this
Posted September 21 2017 - 04:30 AM
Posted September 21 2017 - 07:28 AM
So, Fred needs to be pushed to get it done!
Fred did the wright thing. A little pushing but the end result was great.
- Gunz23 likes this
Posted January 07 2018 - 07:01 PM
I had South Shore Sportsman work on a 1911 that was previously converted to 9mm. I had them convert the pistol back to it's original .45 configuration. They also repaired a Ruger revolver that had a timing issue. Oh, almost forgot, they also replaced a stubborn rear sight on one of my 3rd Gen S&W pistols. I broke my sight removal tool and those guys were able to remove the sight without doing any damage to the pistol, or sight.
I'll always go to them first, before anyone else locally.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users