3 replies to this topic

[Mikeybonez28]

Official introduction i guess. Im mike, mechanic from Brooklyn. Ive been into blades & weapons for as long as i can remember, never owned a rifle but Ive shot a few. Also had a few paintball markers & pellet rifles, 3 pumps (sub 1000 fps) and a 1200 fps springer

Im looking to build a budget AR pattern rifle that I can take to a LI range & not have any trouble with the RO's concerning "Safe". What I know (or have heard) is if the receiver is marked AR 15 then it's a no go unless its registered. Also if its a semi then there's 1 of 2 options. Either fixed mag or featureless. I plan on building a single shot with a standard upper. Ditch the gas tube & either weld the gas block shut or thread it for a set screw & call it done

With the SA's interactive tool, if its a single shot Im fine & shouldn't have to worry but this is NY so I want to be sure before I buy

Im not trying to break any laws, just skirt them a little. Featureless doesn't appeal to me at all and a pinned/fixed mag, also not my cup of tea.

I'll detail the build plans in a separate post, I think you all have read enough for one post, thanks for reading/listening & hopefully I'll be up & running soon

Sent from my LGLS991 using Tapatalk

[Barnslayer]

Un-Safe does not apply to bolt action rifles as long as they meet minimum length.
Look into 223 scout rifles.

[cu455]

You need to look into NYC laws in addition to SAFE act. I don't really know much about NYC laws so I can't help you. I am pretty sure no AR or magazines above 5 rounds, double check. Look into the Ares ACR.

[Phoenix69]

Hello